|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
E2E1034 -27-Y4 Semiconductor MSM82C43 Semiconductor INPUT/OUTPUT PORT EXPANDER This version: Jan. 1998 MSM82C43 Previous version: Nov. 1996 GENERAL DESCRIPTION The MSM82C43 is an input/output port expander device based on CMOS technology and designed to operate at low power consumption levels. In systems employing the MSM80C48/49 8-bit single chip microcomputers, 4-bit data can be expanded by dividing between four I/O lines by executing the MOVDA, Pp, A and ORLDPp, A instructions. FEATURES * CMOS technology for low power consumption * 2.5 to 6 V single power supply (dependent on MSM80C48/49 operating frequency.) * Fully static operation * Bidirectional I/O ports * TTL coimpatible (ports 4 thru 7) * Functional compatiblity with Intel i8243 * Package options 24 pin Plastic DIP (DIP24-P-600-2.54) : (Product name : MSM82C43RS) 24 pin Plastic SOP (SOP24-P-430-1.27-K) : (Product name : MSM82C43GS-K) 1/13 Semiconductor MSM82C43 FUNCTIONAL BLOOK DIAGRAM ADDRESS DECODER LATCH 4 PORT 4 INPUT BUFFER INSTRUCTION DECODER LATCH 4 PORT 5 PORT 2 4 MUX TEMP 4 INPUT BUFFER LATCH PROG CS CONTROL AND/OR LOGIC INPUT 4 4 PORT 6 BUFFER RESET CIRCUIT LATCH 4 PORT 7 INPUT BUFFER 2/13 Semiconductor MSM82C43 PIN CONFIGURATION (TOP VIEW) MSM82C43RS P50 P40 P41 P42 P43 CS PROG P23 22 1 2 3 4 5 6 7 8 9 24 23 22 21 20 19 18 17 16 15 14 13 VCC P51 P52 P53 P60 P61 P62 P63 P73 P72 P71 P70 P21 10 P20 11 GND 12 24-pin Plastic DIP MSM82C43GS P50 P40 P41 P42 P43 CS PROG P23 22 P21 P20 GND 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 VCC P51 P52 P53 P60 P61 P62 P63 P73 P72 P71 P70 24 pin Plastic Small Outline Package 3/13 Semiconductor MSM82C43 ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage Input Voltage Storage Temperature Symbol VCC VI TSTG Conditions Ta=25C Ta=25C -- Rating -0.5 to 7 -0.3 to 7 -65 to +150 Unit V V C RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Ambient Temperature Fan-out Symbol VCC TA N Conditions -- -- MOS load TTL load Range 2.5 to 6*1 -40 to +85 10 3*2 Unit V C -- -- 4/13 Semiconductor MSM82C43 ELECTRIC CHARACTERISTICS DC Characteristics (VCC=4.0V to 6.0V, Ta=-40C to +85C) Parameter "L" Input Voltage Symbol VIL Conditions -- Min. -0.5 Typ. -- Max. 0.13VCC V V "H" Input Voltage "L" Output Voltage Ports 4-7 "L" Output Voltage Ports 7 "L" Output Voltage Ports 2 "L" Total Output Current from Ports 4-7*3 "H" Output Voltage Ports 4-7 "H" Output Voltage Ports 2 "H" Output Voltage Ports 4-7 "H" Output Voltage Ports 2 Input Leak Current*3 Input Leak Current*6 VIH VOL1 VOL2 VOL3 IOL VOH1 VOH2 VOH1 VOH2 IIL1 IIL2 -- IOL=5mA IOL=20mA IOL=0.9mA 5mA/1PIN IOH=-240mA IOH=-100mA IOH=-40mA IOH=-20mA 0VINVCC 0 VIN VCC "Standby stop Power Supply Current ICC No accessing For continuous MSM80C49 accessing at 11 MHZ 0.4VCC -- -- -- -- 0.75VCC 0.75VCC 0.93VCC 0.93VCC -10 -10 -- -- -- -- -- -- -- -- -- -- -- -- 5 VCC V 0.45 1 0.45 80 -- -- -- -- 20 10 100 V V V mA V V V V mA mA mA Unit V -- 1 2 mA *1 *2 *3 *4 *5 *6 The supply voltage during operation is dependent on MSM80C49 operating frequency. Except P20 thru P23. P40 thru P43, P50 thru P53, P60 thru P63, P70 thru P73. P70 thru P73. P20 thru P23. P20 thru P23, CS, PROG. 5/13 Semiconductor MSM82C43 AC CHARACTERISTICS Parameter Port Control Setting Time (up to PROG Falling Edge.) Port Control Holding Time (up to PROG Falling Edge.) Output Data Setting Time Output Data Holding Time Input Data Holding Time PROG Pulse Width CS Valid Time (before and after PROG) Output Data Valid Time (at Ports 4-7) Input Data Holding Time (at Ports 4-7) Input Data Holding Time (from PROG Falling Edge) Symbol tA tB tC tD tH tK tCS tPO tLP1 tACC Conditions 80pF LOAD 20pF LOAD 80pF LOAD 20pF LOAD 20pF LOAD -- -- 100pF LOAD -- 80pF LOAD (VCC=4.0V to 6.0V, Ta=-40C to +85C) Min. Max. Unit 50 60 200 20 0 700 50 -- 100 -- -- -- -- -- 150 -- -- 700 -- 650 ns ns ns ns ns ns ns ns ns ns 6/13 Semiconductor MSM82C43 TIMING CHART PROG tA tB tK tC tD P20 thru P23 (When writing) INSTRUCTION FLOAT DATA tH FLOAT tACC P20 thru P23 (When reading) INSTRUCTION OUTPUT DATA tPO P40 thru P43 | P70 thru P73 (When writing) tLPI P40 thru P43 | P70 thru P73 (When reading) tCS PREVIOUS OUTPUT DATA tLPI OUTPUT DATA INPUT VALID tCS CS 7/13 Semiconductor MSM82C43 PIN FUNCTIONS Pin PROG CS P20 - P23 P40 - P43 P50 - P53 P60 - P63 P70 - P73 VCC GND Function Clock input from MSM80C49. When PROG is changed from "H" to "L", MSM82C43 STARTS operating in accordance with an order from MSM80C49. Input for chip select. Outputs and internal status cannot be changed when CS is "H". 4-bit bidirectional I/O ports. When connected to P20 thru P23 of MSM80C49, direct data transfer from port to accumulator and from accumulator to port is possible. 4-bit bidirectional I/O ports. Data is latched statistically when output to ports, but is only valid while PROG is at "L" level when input. +5V power supply GROUND FUNCTIONS Power-on reset mode Upon powered on, ports to 7 are 3-stated, and 2 is put into an input mode. Write mode Execution of MOVDPp, A, ORLDPp, A, ANLDPp, and A by MSM80C49 enables direct output of accumulator contents to ports 4 thru 7, and output to the ports after ORing or ANDing with port data. The port data is latched statistically at this time and remains unchanged until execution of the next instruction. Read mode Execution of MOVDA andPp results in data of ports 4 thru 7 being accepted by the accmulator. Note that port data is valid only while PROG is at "L" level. When at "H" level, ports 4 thru 7 are switched to tristate and port 2 is switched to input mode. Address and instruction code Instruction Read Write OR AND P23 0 0 1 1 P22 0 1 0 1 Port Port 4 Port 5 Port 6 Port 7 P21 0 0 1 1 P20 0 1 0 1 8/13 Semiconductor MSM82C43 Multiple connection example MSM82C43 SELECTOR PORT CS PROG P20 -P23 CS PROG P20 -P23 CS PROG P20 -P23 MSM80C49 PROG P20 -P23 9/13 Semiconductor MSM82C43 OUTPUT CHARACTERISTICS Standard dc characteristics Output "H" voltage (VOH) vs. output currnt (IOH) tPO, tH, and tACC vs. power supply voltage (VCC) Ta=25C 5 Output "H" voltage VOH (V) Ta=25C 700 4 600 3 2 1 tPO, tACC, tH (ns) 500 400 300 200 100 0 3 5 6 Power supply voltage (VCC) tH tACC tPO 0 -1 -2 -3 -4 Output current IOH (mA) -5 Output "L" voltage (VOH) vs. output currnt (IOH) Ta=25C 5 Output "L" voltage VOL (V) 4 3 2 1 0 -1 -2 -3 -4 Output current IOL (mA) -5 Operating frequency vs. power supply voltage (ICC) Ta=25C Power supply current ICC (mA) 2 1 0 1 3 6 11 MSM80C49 operating frequency (MHz) Note: The direction which the output current flows through the device is taken as the positive direction. 10/13 Semiconductor MSM82C43 GUARANTEED MSM82C43 OPERATING RANGE Ta=-40 to +85C Guaranteed operating range MSM80C49 operating range (MHz) 3 6 11 2 3 4 5 6 Power supply voltage (VCC) 11/13 Semiconductor MSM82C43 PACKAGE DIMENSIONS (Unit : mm) DIP24-C-600-2.54 24 13 1 INDEX MARK 30.8MAX 12 15.110.25 15.24 2.800.40 1.27TYP 5.10MAX SEATING PLANE 0.51MIN 2.54MIN 1.27TYP 2.54 0.500.10 +0.15 0.25-0.05 0.25 M Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 12/13 Semiconductor MSM82C43 (Unit : mm) SOP24-P-430-1.27-K Mirror finish Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin 42 alloy Solder plating 5 mm or more 0.58 TYP. Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 13/13 |
Price & Availability of MSM82C43 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |